Enabling Access Gateway Mode Using The Cli; Changing From Access Gateway Mode To Fabric Switch Mode - Fujitsu Brocade 6545 Gen5 Hardware Reference Manual

Enabling Access Gateway mode using the CLI

Complete the following steps to enable Access Gateway mode using the CLI.
1. Log in using the default administrative account.
2. Enter the switchDisable command to disable the Switch Module.
3. Enter the configUpload command to save the current configuration on the Switch Module.
4. Enter the following command to enable Access Gateway mode:

Changing from Access Gateway mode to Fabric Switch mode

If your Brocade 6545 16 Gbps FC Switch Module is currently configured in Access Gateway mode,
you can enable the module for Fabric OS Native mode by disabling Access Gateway mode. When
you do this, the module automatically reboots in Fabric OS Native mode; however, the switch will be
segmented so as not to effect the external Fabric. For instructions on how to join this module to the
Fabric, refer to the Brocade Access Gateway Administrator's Guide.
Determine if the Switch Module is running in Access Gateway mode by entering the switchShow
command to display the current switch configuration. If running in Fabric OS Native mode, the
switchMode parameter displays "Access Gateway Mode."
For complete instructions on disabling Access Gateway mode using the CLI and joining the switch
to the fabric, refer to the "Disabling Access Gateway Mode" section in the Brocade Access Gateway
Administrator's Guide.
Brocade Gen5 6545 16-Gbps FC Switch Module Hardware Reference Manual
53-1003184-01

Changing from Access Gateway mode to Fabric Switch mode

Login: admin
Password: password
This command is optional and is only required if you are converting an existing Switch Module
to Access Gateway mode.
ag modeEnable
––
The Switch Module automatically reboots and comes back online in Access Gateway mode
using a factory default F_Port to N_Port mapping. You can enter the
ag modeShow command to ensure that the module is in Access Gateway mode. Refer to the
––
Access Gateway Administrator's Guide for detailed configuration information.
You can also enter the ag
Enter ag help command to display a list of all Access Gateway actions.
––
mapshow command to display the F_Port to N_Port mapping.
––
3
31