Saving Embroidery Patterns In The Machine's Memory; If The Memory Is Full - Brother 882-T51 Operation Manual

c Touch the key of the USB port that the
embroidery card reader/USB card writer
module* is plugged into.
→ The list of patterns on the embroidery card appears.
d Select the pattern as described on
pages 107 to 108.
Saving embroidery patterns in
the machine's memory
You can save embroidery patterns that you have
customized and will use often; for example, your
name, patterns that have been rotated or had the
size changed, patterns that have had the
embroidering position changed, etc. A total of
about 1 MB of patterns can be saved in the
machine's memory.
Note
• Do not turn the main power to OFF while the
"Saving..." screen is displayed. You will
lose the pattern you are saving.
Memo
• It takes a few seconds to save a pattern to
the machine's memory.
• See page 115 for information on retrieving a
saved pattern.
SELECTING/EDITING/SAVING PATTERNS
a Touch when the pattern you want to
save is in the embroidering screen.
b Touch .
* Touch to return to the original screen without
saving.
→ The "Saving..." screen is displayed. When the
pattern is saved, the display returns to the original
screen automatically.

■ If the memory is full

If the screen below displays, either the maximum
number of patterns have been saved or the pattern
you want to save takes a lot of memory, and the
machine cannot save it. Press
previously saved pattern, then you can save the
current pattern. Refer to "Retrieving patterns from
the machine's memory" on page 115.
5
and delete a
113