Table of Contents
Advertisement
Specifying the thumbnail size
You can set whether the thumbnails for selecting
an embroidery pattern are displayed in normal size
or large size. Large size is 1.5 times the normal
size.
When the embroidery machine is purchased,
normal size is selected.
The thumbnail size setting can be specified from
page 2 of the settings screen.
a
Touch
and
thumbnail size.
Note
• The thumbnail size will not show a change
while in the pattern selection screen. In this
case, return to the category selection
screen and reselect a pattern category.
Specifying thread sensor
If thread sensor is set to "OFF", the machine does
not stop until embroidering is finished, even if the
thread breaks or there is no more thread in the
bobbin. Set thread sensor to "ON", except when it
is necessary to set it to "OFF".
When the machine is purchased, "ON" is selected.
The thread sensor can be specified from page 3 of
the settings screen.
to select the desired
BASIC SETTINGS AND HELP FEATURE
a
Touch
or
setting.
Note
• Normally, set thread sensor to "ON".
When thread sensor is set to "OFF", the
machine will not be able to detect if the
upper thread has become tangled.
Continuing to use the machine with tangled
thread may cause damage.
Changing the speaker volume
The volume of operation sounds can be changed.
The speaker volume can be set to "OFF" or a
setting between "1" and "5". When "OFF" is
selected, no sound is produced from the speaker.
When the embroidery machine is purchased, "3"
is selected.
The speaker setting can be specified from page 3
of the settings screen.
a
Touch
and
speaker volume.
→ Check that the desired speaker volume is selected
with the operation sound produced when a key is
touched.
to select the desired
to select the desired
147
6
Advertisement
Chapters
Table of Contents
