Brother 882-T51 Operation Manual page 92

f Touch two or three times to go back
two or three stitches.
1
1 Each touch of this key moves one stitch back
through the stitching.
• Check that the red pointer light indicates the needle
drop point where stitches have already been done.
g Touch .
→ The embroidering screen appears again.
h Touch
"Start/Stop" button to continue
embroidering.
Memo
• The machine can be stopped at any time,
even while it is embroidering; however, if
the machine is stopped when the thread
color is changed, it is not necessary to go
back through the stitching when
embroidering is continued.
90
, and then press the