Table of Contents
Advertisement
Basting Embroidery
Before embroidering, basting stitches can be sewn along the outline of the pattern. This is useful for
embroidering fabric that cannot have stabilizer material affixed with an iron or adhesive. By stitching
stabilizer material to the fabric, shrinkage of the stitching or misaligned pattern can be minimized.
Note
• It is recommended to finish combining and
editing the pattern before selecting the
basting setting. If the pattern is edited after
selecting the basting setting, the basting
and pattern may become misaligned, and
the basting under the pattern may be
difficult to remove after embroidering is
complete.
a
Touch
, and then display page 1 of
the settings screen.
b
Use
and
to specify the distance from
the pattern to the basting stitching.
Memo
• The higher the setting, the farther the
basting is from the pattern.
• The setting remains selected even if the
machine is turned off.
c
Touch
to return to the embroidering
screen.
96
d
Touch
to select the basting setting.
Note
• When
is pressed, the pattern is moved
to the center. After selecting the basting
setting, move the pattern to the desired
position.
• To cancel the setting, touch
→ Basting is added to the beginning of the
embroidering order.
e
Touch
"Start/Stop" button to begin embroidering.
f
When embroidering is finished, remove the
basting stitching.
.
, and then press the
Advertisement
Chapters
Table of Contents
