Winding The Bobbin - Brother 882-T51 Operation Manual

Winding the bobbin

Note
• Use the included metal bobbin when
winding the bobbin with the machine.
• Circled numbers on the thread guide
assembly indicate the threading path for

winding the bobbin.

Prepare the metal bobbin and the spool of bobbin
thread.
a Turn the main power to ON.
b Align the groove in the bobbin with the
spring on the bobbin winder shaft, and set
the bobbin on the shaft.
1 Groove in the bobbin
2 Spring on the shaft
34
c Place the thread spool on either the first or
second spool pin on the left side. Push the
spool cap onto the spool pin as far as
possible to secure the thread spool.
2
3
1 Spool cap
2 Thread spool
3 Spool pin
d Pass the thread through the hole in the
thread guide just above the spool from the
back to the front.
1 Hole in the thread guide above the spool