Setup Location - Brother 882-T51 Operation Manual

Setup location

Setup the machine in a location that meets the following requirements.
• Position machine more than 50 mm (2 inches) from the wall
• Allow sufficient space around the machine
• Place no objects within the moving range of the embroidery frame
• Set-up machine near an electrical outlet
• Use a level and stable surface, such as a desk
• Use a surface that can support the weight of the machine (about 31 kg (68 lb))
• Allow open space around the ventilation slots found on the back of the machine
• In order to prevent malfunctions or damage, do not set up the machine in a location exposed to the
following conditions.
Direct sunlight
Insufficient space
Connection to extension cords or
multiple adapters
Extremely high or extremely low
temperatures. The operating
environment should be between
5 °C (40 °F) and 40 °C (104°F).
Note
• For your safety: Since the machine weighs approximately 31 kg (68 lb), do not set it up on an unstable
table or desk.
747 mm
(29-13/32
inches)
More than
150 mm
(5-29/32 inches)
CAUTION
Liquids, such as water
511 mm More than
(20-15/128 150 mm
inches) (5-29/32 inches)
Extreme dust
Blocked ventilation slots
An unstable surface
Objects within the moving range
of the embroidery frame
GETTING READY
1
More than
50 mm
(2 inches)
587 mm
(23-7/64 inches)
More than
350 mm
(13-3/4 inches)
19