Table of Contents
Advertisement
13. Removing the Embroidery Frame and Fabric
After embroidering is finished, remove the embroidery frame, and then remove the fabric from the frame.
Removing the embroidery frame
CAUTION
• When removing the embroidery frame, make
sure that the "Start/Stop" button is lit in red. If
the "Start/Stop" button is flashing in green,
the machine may start embroidering. If the
machine accidentally starts operating, injuries
may result.
• When removing the embroidery frame, be
careful that the embroidery frame does not hit
any other part of the machine.
• Do not lift up the embroidery frame holder
with extreme force, otherwise it may be
damaged.
a
With both hands, grab the left and right
sides of the arms of the embroidery frame
holder, and then slightly lift up the frame.
The pins on the arms of the embroidery frame holder
should come out of the holes in the sides of
embroidery frame.
Pull off the embroidery frame toward you.
b
58
Removing the fabric
a
Loosen the outer frame screw.
→ If the screw was tightened using a screwdriver
(large), use the included screwdriver (large) to
loosen it.
b
Remove the outer frame, and then remove
the fabric.
Advertisement
Chapters
Table of Contents
