Fujitsu ETERNUS LT260 User Manual page 18

Chapter 2 Operating the Library
2.3 Logging into the Library
4
Click Login.
The user levels are
• user
The initial password is "std00001". The user account provides access to status information, but not configu-
ration, maintenance or operation functions.
• administrator
The administrator password is required to login as the administrator user. The same administrator pass-
word is used for the remote panel and operator panel. The initial administrator password is "adm00001".
The administrator user has access to all functionality except for the log configuration and Service features.
• service
Access to this user is by Service personnel only. The service password is set at the factory. The same service
password is used for the remote panel and operator panel. Both the administrator and service passwords
are required for a service person to enter the service area.
• security
In addition to the functions that are available when logged in as the administrative user, the key manage-
ment function can be set. After the Key Management Function Option is purchased, the setting for the key
management function is available.
The initial password is "security". However, this password can only be used to log in from the operator
panel.
After the initial password is changed on the operator panel, the password can then also be used to log in
from the remote panel.
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Panel Operation-
18
Copyright 2016 FUJITSU LIMITED
End of procedure
P3AM-8802-04ENZ0