Fujitsu ETERNUS LT260 User Manual page 24

Chapter 2 Operating the Library
2.5 Configuring the Library
3
Click Save.
4
Select the destination location:
• Remote Panel (remote panel only)
Downloads the configuration file to the browser or system running the remote panel.
• USB Device Front
Downloads the configuration file to a USB flash drive inserted into the USB port on the front of the
library.
• USB Device Rear
Downloads the configuration file to a USB flash drive inserted into the USB port in the back of the
library.
■ Restoring the library configuration from a file
Procedure
1
Restoring the configuration file from a USB device, copy the configuration file you want to
restore onto the USB device and remove any other configuration files from the USB device.
2
Navigate to the Configuration > System > Save/Restore Configuration screen.
3
If you will be restoring the configuration file from a USB device on the library, insert the USB
flash drive containing the configuration file into one of the USB ports on the base module.
4
Select the source location:
• Remote Panel (remote panel only)
Restores the configuration file from the computer running the remote panel. Click Browse to navi-
gate to and select the configuration file.
• USB Device Front
Restores the configuration file from a USB flash drive inserted into the USB port on the front of the
library.
• USB Device Rear
Restores the configuration file from a USB flash drive inserted into the USB port in the back of the
library.
5
Click Upload File & Restore.
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Panel Operation-
24
Copyright 2016 FUJITSU LIMITED
End of procedure
End of procedure
P3AM-8802-04ENZ0