Center Panel Elements; Configuring The Library; Using The Initial Configuration Wizard - Fujitsu ETERNUS LT260 User Manual

Chapter 2 Operating the Library

2.5 Configuring the Library

2.4.3

Center Panel Elements

• Open Mailslot (Administrator user only)
Click or tap to unlock the mailslot on the selected module. Mailslots must be enabled before the slots can
be used as mailslots. See
• Open Magazine (Administrator user only)
Click or tap to unlock a magazine in the selected module. Only one magazine in the library can be open at
a time. See
• Configuration (Administrator user only)
Click or tap to configure the library. See
• Maintenance (Administrator user only)
Click or tap to access maintenance functions. See
• Operation (Administrator user only)
Click or tap to access operation functions. See
• Status
Click or tap to access status information. See
2.5 Configuring the Library
2.5.1

Using the Initial Configuration Wizard

The wizard guides you through setting the administrator password, configuring the time zone, date and time,
and library network settings, and then starting an initial system test. You can skip items and stop the wizard
at any time. Once you have configured the network settings and set the administrator password from the
operator panel, you can initiate the wizard from the remote panel or operator panel to complete the remain-
ing configurations.
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Panel Operation-
"2.5.12 Enabling or Disabling Mailslots" (page
"2.7.3 Opening a Magazine" (page
Copyright 2016 FUJITSU LIMITED
64).
"2.5 Configuring the Library" (page
"2.6 Maintaining the Library" (page
"2.7 Operating the Library" (page
"2.8 Viewing Status Information" (page
22
41).
22).
48).
62).
68).
P3AM-8802-04ENZ0