Wall-Mounting The Dss Console; Figure 2-104 High Position Setting; Figure 2-105 Cabling For Wall-Mount - NEC SL1100 Hardware Manual

ISSUE 5.0
3. Adjust the leg to desired height.
4. Lead the Line cord through the applicable grooves.
(Refer to Figure 2-102 Cabling of DSS on page

5.3.2 Wall-Mounting the DSS Console

1. Lift the leg and lead the cable through the applicable grooves. Refer to
Wall-Mount on page
Hardware Manual
Leg

Figure 2-104 High Position Setting

2-73. Lower leg to stowed position.
Leg

Figure 2-105 Cabling for Wall-Mount

< High position >
2-72)
< Bottom view>
SL1100
Figure 2-105 Cabling for
2-73