Figure 2-153 Six Repeaters Attached To Base; Figure 2-154 Daisy-Chain Layout - NEC SL1100 Hardware Manual

SL1100 ISSUE 5.0

Figure 2-153 Six Repeaters Attached to Base

In addition, the DTL-RPT-2 Repeater supports a sequential or "daisy chain" layout to extend coverage
in a single direction. Up to three repeaters can be installed in sequence.

Figure 2-154 Daisy-Chain Layout

When a repeater powers on, it searches for signals from the base and any other repeaters registered
to the same base. The repeater will automatically connect to the strongest available signal. You can
combine "star" and "daisy chain" layouts to create a wide variety of coverage configurations, as long
as you have no more than six repeaters per base unit.
2-106 Installation