ISSUE 5.0
6.
Using one supplied screw (M3x6 with washer), secure the back plane of the Battery Box to the
FM/WM Base.
2.6.3 Mounting One KSU on the Battery Box
Before wall-mounting or floor-mounting the IP4WW-Battery Box, a single KSU can be mounted on the
Battery Box.
1.
Loosen two screws and remove the Front Cover of the Battery Box.
Front Cover
Hardware Manual
Two screw holes
(Use either one)
< Front view>
Figure 2-46 Securing the Battery Box
Figure 2-47 Removing the Front Cover
SL1100
Two screws
(with stopper)
2-33