Figure 2-160 Incorrect Installation; Figure 2-161 Correct Repeater Installation - NEC SL1100 Hardware Manual

SL1100
3. Make a note where you begin to hear noise on the line (the signal is getting weaker). The best
location for Repeater 2 is as far from Repeater 1 as possible while still maintaining a good signal.
4. Repeat the process with Repeater 3, if necessary.
6.3.5.4 Multiple Repeater Systems
You can register up to six repeaters to one base as long as the repeaters are a minimum of 35 feet
apart. Remember the signal can cross through walls and floors.
page 2-112 illustrates repeaters that have been incorrectly installed.
Figure 2-161 Correct Repeater Installation on page 2-112
correctly installed.
2-112

Figure 2-160 Incorrect Installation

Figure 2-161 Correct Repeater Installation

Figure 2-160 Incorrect Installation on
illustrates repeaters that have been
ISSUE 5.0
Installation