Table 2-29 Repeater Led Patterns; Figure 2-156 Back View Of The Dtl-Rpt-2 Repeater - NEC SL1100 Hardware Manual

SL1100
These procedures refer to items on the back of the DTL-RPT-2 Repeater:
During registration, the LED on the front of the repeater will blink. The table explains what the LED
blink patterns indicate.
State
Steady On
Slow blink (one blink per second)
Flicker (2 rapid blinks per second)
2-108

Figure 2-156 Back View of the DTL-RPT-2 Repeater

Table 2-29 Repeater LED Patterns

The repeater is registered to a base and has a good signal from that base (or an-
other repeater registered to that base).
Standby mode. The repeater is not registered or cannot be connected to the regis-
tered base.
The repeater is in registration mode (it is looking for a base to register to).
Meaning
ISSUE 5.0
Installation