Entrance telephone
Step by step
qp.qp
eim
e.fd
efi
e.fd
w
p
128
e
= Day
f
= Night
w
p
Enter the extension number (e.g. 12/102) to answer
calls from the entrance telephone.
w
Dial the next extension number (up to 10 extensions).
or
w
r
Press this key.
Initial status for programming mode.
Deleting DID Extensions
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
Enter the slot for the entrance telephone interface (1 to
20).
e
f
Select a period of time:
or
e
= Day
f
= Night
w
q
Delete DID extensions.
w
r
Press this key.
Initial status for programming mode.
Permission to open the door
If there is a locking device installed in given slots in the
internal entrance telephone, permission will be required
for opening the door in the required slots.
This class of service is assigned to all extensions by de-
fault.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
Enter the slot for the extension configured as the door
opener (1 to 20).
w
. p
Enter the extension numbers (e.g., 12/102) to be acti-
vated as door openers.