No Div.leg Info" For Isdn Line - Siemens HiPath 1100 Programming Manual

Step by step
q
fhm
q
dd . dh
dd . dh
module, place position 11 and port from 00 ... 04).
w
r
Master/Slave.
or
q
= Master
r
= Slave
w
Initial status for programming mode.

"No DIV.LEG info" for ISDN line

If this option is deactivated and a local carrier provides
the "Diversion" service for ISDN lines, the extension
forwarding the external calls to an external line can
show the original numbers of the participants to the
calling parties.
Otherwise, only the number of the MSN/Attendant of
the PABX will be made available.
In the default configuration, this option is activated for
the following countries: Australia, Greece and the Neth-
erlands.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
p
Enter the S
df
dg
de
p
Enter the slot for the S
dd . de
port 00 is only used for the external line - PP or PMP)
dd . dh
dd . dh
module, place position 11 and port from 00 ... 04).
w
r
Activate/Deactivate.
or
q
= Activate
r
= Deactivate
= For the HiPath 1150
= For theHiPath 1190 (For the second
module slot on the system.
0
= For the HiPath 1120
= For the HiPath 1150;
ee
and = For the HiPath 1190 .
module port:
0
= For the HiPath 1120 (The slot for
= For the HiPath 1150;
= For theHiPath 1190 (For the second
Digital trunk settings
157