External Door Extension - Siemens HiPath 1100 Programming Manual

Step by step
efi
e.fd
w
q
Delete extensions activated for opening doors.
w
r
Press this key.
Initial status for programming mode.
Deleting Authorized Extensions
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
Enter the slot for the extension configured as the door
opener (1 to 20).
w
q
Delete the extension assigned to the entrance tele-
phone slot.
w
r
Press this key.
Initial status for programming mode.

External door extension

The use of an external door extension is defined during
the programming phase of "Type of equipment con-
nected to the extension"
devices are connected directly to analog ports A/B or in
the bar of the S
• The external analog entrance telephone device
must behave like an analog telephone (dialing, de-
tection and DTMF control)
• The ISDN external door extension device must be-
have like an ISDN telephone. It must also be con-
trolled by DTMF signals.
Consult the external door extension manual to
check available settings.
Go to the HiPath 1100 Manager folder - Ad-
vanced/System Settings/General - "External en-
trance telephone" and enter the information on
the entrance telephone device for the device to
work correctly.
page 85, code 003. These
module as follows:
0
Entrance telephone
129