Coefficient For An Analog Trunk - Siemens HiPath 1100 Programming Manual

Step by step
eek
ehk
e . h
w
Enter the programming code.
w
p
Enter a length of time (05 to 20 seconds).
w
Initial status for programming mode.
Default:
•
•
•

Coefficient for an analog trunk

If the appropriate impedance value or type of external
line is available, the quality of transmission and recep-
tion of information between the local carrier and the
PABX can be improved.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Enter a number for an analog trunk (e.g., 801).
w
Enter the appropriate number for the type of external
line:
For example, in the case of Brazil it would be:
e
= standard 900 line Ω (default)
f
= 600 line Ω
g
= short line
h
= long line
w
p
Enter the next external line number.
or
w
r
Press this key.
Initial status for programming mode.
13 seconds for Argentina,
04 seconds for Korea and
06 seconds for all other countries.
External line settings
47