Table 7-17 Digital Trunk Settings - Siemens hipath 1100 Service Manual

Configuring the System Specifically for the Client
Table of the System's Programming Codes
Table 7-16 Fax/DID Module
Programmed Code
Functions
Collect Call Barring 008
MSN Answering for 080
Fax/DID
Fax Extension for 081
MSN
Fax/DID Release 094
after a Timeout
Digital trunk settings
Table 7-17 Digital trunk settings
Programmed Code
Functions
062
S Ports(HiPath
0
1190
*
Mode of Operation 90
Symmetric Call 074
Absence of ACK 075
Setup for external
ISDN Line
Notify 076
Automatic Keypad 077
Assignment of an 078
external ISDN line to
a MSN
External line prefix 89
7-18
Intermediate Data
1 - Fax
2 - DID
3 - Fax/DID
4 - Message (announcement)
Slot: 001 to 140
Slot: 001 to 140
Intermediate Data
Slot: 01 to 20
Slot
+
Physical Interface
Slot: 001 to 140
1 - National
2 - International
Data to be Programmed Completing
∗
- To enable
# - To disable
0 - Deactivated
1 - Fax
2 - DID
3 - Fax/DID
4 - Message
5 - Autofax
Extension
(00 to 99) in 5-second cycles Automatic
Data to be Programmed Completing
1 - External line and exten-
sion
2 - External line
3 - Extension
1 - Point-to-point connection
(PP)
2 - Point-to-Multipoint
connection (PMP)
3 - S
0 Bus line
∗
- To enable
# - To disable
∗
- To enable
# - To disable
∗
- To enable
# - To disable
∗
- To enable
# - To disable
external line or
∗
- To delete
Line prefix (up to 5 digits)
For internal distribution only
Default
Data Entry
# instead of # - To disable
mode
# instead of 00 - Deacti-
slot vated
# instead of None
slot
06 (30
seconds)
Default
Data Entry
# instead of 1 - External
slot line and
extension
# instead of 1 - First port
slot 3 - All other
ports
∗
Automatic - To enable
Automatic # - To disable
∗
Automatic - To enable
Automatic # - To disable
# instead of All assigned
slot lines
# instead of the None
digit or Auto-
matic
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual