Tme1 Module - Siemens hipath 1100 Service Manual

For internal distribution only
Connector Assignments
Table 3-18 S module connectors HiPath1130/1150/1190
0
X1 Connector
Connection to the MB is
through a pin connector
S Basic Access
0
HiPath 1100
S
0
Figure 3-14 S Basic Access Connection
0
S Module Connector
0
Figure 3-15 S connector signal distribution
0

3.6.2 TME1 Module

Introduction
The TME1 Module is a Digital Interface Unit (DIU) used for connecting the
HiPath1130/1150/1190 to the PSTN via an E1 trunk. The E1 trunk can carry 30 digital
voice channels. However, the HiPath 1130/1150 systems use 15 channels, while the
HiPath 1190 systems use up to 30 channels with the TME1 module allocated to slot
1 and up to 15 channels when it is allocated to slot 11.
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
X2 Connec- X3 Connec-
tor
RJ 45
Cable
1 8
X
RJ 45
X4 Connec-
tor tor
RJ 45 RJ 45
4-wire
1 = NC
2 = NC
3 = SX +
4 = SR -
5 = SR +
6 = SX -
7 = NC
8 = NC
SX = Signal Transmit
SR = Signal Receive
Modules
Option Modules (MO)
X5 Connec- X6 Connec-
tor tor
RJ 45 RJ 45
Public Network
NT
3-27