Table 7-9 General Settings - Siemens hipath 1100 Service Manual

Configuring the System Specifically for the Client
Table of the System's Programming Codes
Table 7-9 General settings
Programmed Cod
Functions e
Multiple for Call 042
Charge Factor
Call Charge Factor 043
for extensions
Call Charge Value by 97
Extension
Call Cost Limit by 044
Extension
Date for Updating 045
the Call Cost Limit
for an Extension
Setting a System 80
Password
Night Service Pass- 49
word
Restoring Default 99
Settings
Regular Timers 39
System Timers 40
Emergency 040
Numbers
Module Detection 061
Type of MSN Signal 073
Reference Clock 090
Assigning a Tempo- 093
rary MSN
**〉 For more details on how to set timers refer to the Help file of the HiPath 1100 Manager administrative software. See the
sections on timers specifically.
7-12
Intermediate Data
1 - Factor 1
2 - Factor 2
Extension
Extension
Extension
System password (default: 31994)
**01 to 35: Timer code
**1 to 34: Table entry
Slot: 1 to 5
00 - Detect all modules or
01 to 20
Slot: 001 to 140
slot or
00 + * - Erases (switches to Auto
mode)
Data to be
Programmed
Pulse multiplier: 000 to 254 Automatic
1 - None
2 - Factor 1
3 - Factor 2
Value: 00000 to 99999
+
Comma position: 0 to 4
∗
- To enable
# - To disable
dd (day, from 01 to 31) or
∗
- To disable
New password (5 digits)
00000 to 99999
New setting: 0 to 65535
New setting: 0 to 255
Number (up to 10 digits)
Type of signal: 1 to 4
Physical Interface: 1 to 5
Input data type:
1 - MSN Number
2 - MSN Number slot
A31003-K1250-S100-12-7619
For internal distribution only
Completing Default
Data Entry
001 - Value 1
# instead of 1 - None
extension
Automatic factor - 00001
slot - 0
Automatic # - To disable
∗
Automatic - To disable
Confirm new Password -
password 31994
Automatic Password -
31994
Automatic
#
Factory
#
default
5-second time- Brazil -190 and
out 193
Portugal and
Spain - 112
# instead of 00
slot
Automatic 1
Automatic Automatic
Mode
Automatic None
HiPath 1100, Service Manual