Figure 6-13 Windows 2000 - Driver Location - Siemens hipath 1100 Service Manual

Operation
Starting the Programming Mode
Windows 2000
In order to install any software you must have Administrator's access privileges.
Proceed as follows:
1. A window displays a message informing you that new hardware was found. The
"Found New Hardware Wizard" box appears to guide you through the installation
of the drivers. Click "Next" to proceed.
2. Select the option "Search for the best driver for your device" and click "Next."
3. Select the "Specify a location:" checkbox, if it is not selected yet, then click "Next."
4. A second window opens. Click Browse to select the directory where the uncom-
pressed CallBridge for Data is stored (e.g., C:\Temp). Click Next to proceed.
Figure 6-13
5. A message will appear indicating that a driver has been found. Click "Next" to pro-
ceed.
6. A message appears to the effect that the software to be installed does not have
a Microsoft digital signature. Acknowledge the message by clicking "OK."
7 . In the "Select Port Number" window select the port number for the HiPath 1000
Virtual COM Port (by default, the last free port) and click "OK."
6-18
Windows 2000 - Driver location
For internal distribution only
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual