Siemens hipath 1100 Service Manual page 62

Modules
Option Modules (MO)
Primary Access
HiPath 1100
TME1
Figure 3-17
Connector for TME1 Module Configuration
The connector's function is to connect a PC or modem to a module using a TME1
serial cable (see "TME1 Serial Cable" on page 3-55). This allows you to program the
module using the HiPath 1100 E1 Trunk Manager tool.
Figure 3-18
Warning
!
Do not touch the TME1 module's administrative serial interface connector (X803)
without first disconnecting all analog extensions and trunk connectors. Failure to fol-
low this procedure may expose the user to dangerous voltages.
The administrative serial interface connector (X803) as well as all other connectors
and interconnect cables should only be serviced by trained technical personnel.
3-30
2x coax cable
TME1 CAS access connection
9-pin Mini-DIN
connector
7
9
6
3
2
1
Signal distribution on the TME1 module connector
1 = DCD 6 = DSR
2 = RX 7 = RTS
3 = TX 8 = CTS
4 = DTR 9 = RI
5 = GND
For internal distribution only
Public Network
Modem
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual