Siemens hipath 1100 Service Manual page 164

Operation
Starting the Programming Mode
USB with CAPI Interface
If your computer is connected to the system through a USB cable only for HiPath
1100 administration purposes, the corresponding USB drivers must be installed be-
fore installing HiPath 1100 applications in order for the computer to communicate
with the system.
Administrator access is required for performing the installation under Windows
2000/XP .
Procedure:
1. Check whether the HiPath 1100 system is turned on and the computer has re-
started.
2. Insert the HiPath 1100 CD in the CD drive
3. Connect the system to your computer using the USB cable. A window will an-
nounce that new hardware has been found
4. The New Hardware Wizard will appear. Select the option "Automatically install
software" and confirm by selecting "Next"
5. The correct HiPath 1000 driver will be searched for and found (on the system CD)
(CallBridge for Data Eval). For Windows 2000 and Windows XP , a message will
repeatedly announce that the software being installed does not have a Microsoft
digital signature or has not passed the Windows logo test. Answer the prompts
by clicking "Yes" or "Continue"
6. In the next window click Finish.
7 . The Wizard window will again appear and search for new hardware. Select "Au-
tomatically install software" and confirm by selecting "Next"
8. The correct HiPath 1000 driver will be automatically selected (USB HiPath 1000
interface). For Windows 2000 and Windows XP , a message will repeatedly an-
nounce that the software being installed does not have a Microsoft digital signa-
ture or has not passed the Windows logo test. Answer the prompts by clicking
"Yes" or "Continue. "
9. Select "Finish" to complete the installation.
Begin installing the HiPath 1100 applications:
1. If Auto-Run is not configured, go to the Start menu on Windows, click Run and
then select the Browse button in the dialog box. Open the file SETUP .EXE on the
CD drive.
2. In the Setup window, select the language you want to use
Once the language has been selected, all corresponding country-specific set-
tings will be established.
6-12
For internal distribution only
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual