Installation; Hipath 1100 Installation - Siemens hipath 1100 Service Manual

For internal distribution only

4 Installation

4.1 HiPath 1100 Installation

About this Chapter
This chapter contains information on:
Setting up HiPath 1100 systems. More information on additional equipment and
●
expansions can be found in the "List of Modules" on page 3-2.
Configuration (installation of modules).
●
Danger
!
Only authorized technical personnel should install this system.
Tools and Equipment Required
The following tools are required for installing a HiPath 1100 system:
– Cutters and flat nose pliers
– Standard screwdriver
– Phillips screwdriver
– Tool for attaching wires to the Main Distribution Frame
– Drill
– Hammer
– Level
– Tape measure
– Digital multimeter for checking power and ground connections.
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
Installation
HiPath 1100 Installation
4-1