Ticket Account Codes - Siemens HiPath 1100 Programming Manual

Report
Step by step
dmi
q
134

Ticket account codes

External calls can be assigned account codes which
provide more control over telephone costs. This infor-
mation may be presented on the billing ticket. This ac-
count code is defined by the user and is made up of a
sequence of up to 10 random digits (0...9) which could
be, for example, the number of a court case (see User
Manual Functions used during a call - account code, in
the ).
If account codes have not been configured in advance
using the HiPath 1100 Manager (See account codes -
A31003-K1270-M100-*), only ten-digit account codes
will be accepted in analog and S
wise, the call will not be completed.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
r
Activate/Deactivate sending account code for call detail
or
report:
q
= Activated
r
= Deactivated (default)
w
Initial status for programming mode.
It is important for the system's support techni-
cian to guide users on the settings and proce-
dures involved in using this feature.
telephones. Other-
0