Default Permission And Denied Lists - Siemens HiPath 1100 Programming Manual

Step by step
efh
h i
or
de
...
Wait 5 seconds
efh
h i
or
of
...
Wait 5 seconds If no new number is entered after 5 seconds, the con-
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
j
Enter the number for the permission list.
or
w
fi
Enter the phonebook entry number for the number to
be allowed access.
p
Enter the number that will be allowed access (up to 16
digits).
Warning: Enter the number without the external access
code.
w
Wait for a confirmation tone.
Initial status for programming mode.
Deleting numbers from a permission list
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
j
Enter the number for the permission list.
or
w
fi
Enter the list entry number of the number to be delet-
ed.
tent of that entry is removed.
w
Initial status for programming mode.

Default permission and denied lists

For both permission lists and denied lists there are
some pre-programmed numbers that can be changed,
if necessary.
.
Country
Brazil
Argentina
To change an allowed number, just enter its list
entry number and the new number.
Permission
list
190 193
0800 0810
Important settings
Denied
list
0900
900
29