Transfer When Extension Is Busy; Automatic Seizure Of An External Line - Siemens HiPath 1100 Programming Manual

Programming an extension
Step by step
fek
q
dgj
q
94

Transfer when extension is busy

This setting allows transferring a call when an extension
is busy. A warning tone can be heard on the background
at the extension that receives the transfer, meaning that
there is a call waiting.
When an extension does not answer a call after a spec-
ified period of time or because it is configured with Do
not disturb or data protection, the call rings at the exten-
sion that originated the transfer. The period of time a
call signals a busy extension can be configured using
the "Timeout for call forward no answer" on page 72 fea-
ture (programming code 130) or through the HiPath
1100 Manager.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
r
or
Activate/deactivate transfer:
q
= Activated (default)
r
= Deactivated
w
Initial status for programming mode.

Automatic Seizure of an external line

This allows dialing an external call when the handset is
lifted, without using an access code (e.g., 0). When this
setting is selected you must enter a code to dial internal
calls or activate the Extension key.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Enter the extension number (e.g. 11/101).
w
r
Activate/deactivate automatic seizure:
or
q
= Activated
r
= Deactivated (default)
w
Initial status for programming mode.