Siemens OZS164 SERIES WEB SERVER Commissioning Instructions page 30

Message receiver 1...4
Note
30 / 108
Siemens
Building Technologies
Path: Home > 0.5 OZS164... > Settings > Message receiver > Message receiver
1...4
Enter these settings if you want the web server to send e-mail messages or SMS
(OZS164.23 only). Each recipient allows for either e-mail or SMS.
Data point
M essage receiver 1...4
Default val.: (Blank)
Setting val: Max. 20 characters
F ault priority
Default val.: All
Setting val: All,
Only urgent ones
R eceiver type
Default val.: ---
Setting val: ---, E-mail, SMS
E -mail address
Default val.: messagereceiver@
example.com
S etting val: Max. 46 characters
P hone number receiver
Default val.: (Blank)
Setting val: Phone number
(Format: +<int. area code>...)
Web server
Commissioning
Explanation, example
Customizable text for message recipient. The
designation is displayed in the menu and
transmitted as part of the message.
Notes:
• Note Section 2.4 "Update device web
pages".
• Delete the entry to reset to default text.
Setting value Only urgent ones serves as a
filter when sending system reports and fault
status messages.
The following recipient types are available:
---: No messages to this recipient.
E-mail: Message recipient configured for e-
mail messages via Ethernet.
SMS (OZS164.23 only): Message recipient
configured for SMS via GSM.
Note: The message is sent only to the selected
r ecipient type.
For E-mail recipient types:
Setting value is recipient e-mail address.
For SMS recipient type:
Setting value is the recipient's phone number
(e.g. mobile phone) where messages (fault
and service messages, system reports) are
s ent.
—
—
—
—
—
CE1C5711en
25.08.2010