Change Data; Log Off - Siemens OZS164 SERIES WEB SERVER Commissioning Instructions

Change data

Notes
Change data with login
and log off
Notes

Log off

Note
Siemens
Building Technologies
4.2.3 Change data
You can change the bus device data after successful login. Use a line break to
separate multiple data.
Transmission
Mobile phone  Web server Send SMS to plant phone number:
Web server  Mobile phone Receive SMS:
• "<>" are not part of the entry.
• If an invalid value is sent to a datapoint, the command will be ignored and the
original value is sent back as a confirmation (valid values see Section 4.1).
Send an SMS with login, "#" and log off to query all data with direct login and log
off.
Transmission
Mobile phone  Web server Send SMS to plant phone number:
Web server  Mobile phone Receive SMS:
• "<>" are not part of the entry.
• Data can also be changed without login if no password is required. Access to the
plant, however, is limited only to the sending phone number until the session
times out or is terminated by logoff.
4.2.4 Log off
Send SMS with command "*" to the plant phone number to log off and terminate
the current session.
Transmission
Mobile phone  Web server Send SMS to plant phone number:
Web server  Mobile phone N o feedback.
You can also terminate the current session with "*" if no password is required.
Web server
SMS operation
Message
<Data point text>=<Value>
<Data point text>=<Value>
...
< Data point text>=<Value>
<Data point text>=<Value>
<Data point text>=<Value>
...
< Data point text>=<Value>
Message
*<Password> <Data point text>=<Value> *
e .g. *1234 Operating_mode_HC1=Automatic *
< Data point text>=<Value>
Message
*
67 / 108
CE1C5711en
25.08.2010