Siemens OZS164 SERIES WEB SERVER Commissioning Instructions page 35

System
Note
Siemens
Building Technologies
Data point
M essage triggering
Default val.: Coming
Setting val: Coming,
Coming and going
T ext for: No fault*
Default val.: [Fault input x] Fault
Setting val: Max. 20 characters
T ext for: Fault*
Default val.: [Fault input x] Fault
S etting val: Max. 20 characters
* Notes:
• Note Section 2.4, Section "Update device web pages".
• Delete the entry to reset to default text.
Path: Home > 0.5 OZS164... > Settings > Faults > System
"System" faults refer to bus device faults received via LPB/BSB bus.
Data point
M essage triggering
Default val.: Coming
Setting val: Coming,
Coming and going
Web server
Commissioning
Explanation, example
Coming: A message is triggered when a fault
is received (start of fault).
Coming and going: A corresponding
message is triggered at start and end of fault.
L ED displays a fault input x fault.
Customizable text for the message for an
outgoing fault at the fault input; e.g. Water
pressure ok.
T he designation is transmitted in messages.
Customizable text for the message for an
incoming fault at the fault input; e.g. Refill
water.
T he designation is transmitted in messages.
Explanation, example
Coming: A message is triggered when a fault
is received (start of fault).
Coming and going: A corresponding
message is triggered at start and end of fault.
L ED indicates a bus device fault.
—
—
—
—
35 / 108
CE1C5711en
25.08.2010