HP 1630A Operating And Programming Manual page 109

Using HP-IB or HP-IL Interface
Model 1630A/D/G
delimiting characters: semicolon ( ;), carriage return (cr), or linefeed (If) . When any of the delimiting characters
are encounted, following a command, the command will be transmitted . More than one delimiter maybe used
in a string, however, any one will cause the command to be transmitted . The following examples all cause the
command (TC) to be transmitted : TC;, TCcr, TClf, TC;crlf.
NON-KEYBOARD MNEMONICS
The following HP-113 and HP-IL mnemonics command the analyzer to take actions that are not possible from
the keyboard .
BP
CH
DB
DR
9-2
Beep. Sounds analyzer beeper .
SYNTAX : BP;
- Cursor Home. Moves cursor to known location at upper leftmost field of analyzer display .
SYNTAX : CH ;
SYNTAX : DB;
Table 9-1 . HP-IBIHP-IL Keyboard Mnemonics
Display Blank . Clears analyzer display . For proper operation, the SYSTEM [Configuration] menu
should be on the display when you issue the "DB" command . The word "REMOTE" will not
dissappear from the display . If a trace is in process, the message area of the screen may be
asynchronously updated .
- Display Read . Command causes analyzer to read from display memory, starting from specified row
and column, specified number of characters for transfer to HP-IB/HP-IL interface followed by CR
LF. Inverse video characters are sent as the ASCII character value plus 128 .
SYNTAX : DR <ROW><COL><BYTE-COUNT> ;
where BYTE-COUNT has a maximum integer value of 1472 (23 rows x 64 columns)
ROW is integer value with range of 1 to 23
COL is integer value with range of 1 to 64
Key
Mnemonic Key Mnemonic
SYSTEM menu SM INSERT
IN
FORMAT menu FM
DELETE DE
TRACE menu
TM
LIST menu LM
CLEAR ENTRY CE
WFORM menu
WM DEFAULT DM
CURSOR left CL
NEXT[ ] NX
CURSOR right CR PREV[ ]
PV
CURSOR up
CU DON'T CARE
CURSOR down CD
LABEL left LL RUN
RN
LABEL right LR RESUME
RE
LABEL up LU STOP
ST
LABEL down
LD PRINT PR
PRINT ALL PA
ROLL down
RD
ROLL up
RU
ROLL left RL
ROLL right RR