HP 1630A Operating And Programming Manual page 133

Model 1630A/D/G
Display Messages
ERROR maximum INSERT's used - This message is displayed when the INSERT key is used to insert an
additional field, such as another label in the [Assignment] menu of the FORMAT specification, and the menu
already has as many entries of that type as it can accept .
ERROR no cassette in drive - This message is displayed when the door on the cassette is open or no tape is
currently in the drive when a read or write operation is attempted .
ERROR no disc drive present - There is no disc drive at the present address .
ERROR no disc media present - There is no disc inserted in the addressed unit.
ERROR no room on disc - The current disc is too full to complete the selected operation .
ERROR not 1630G compatable - The inverse assembler just loaded is not compatable with the 1630G logic
analyzer .
ERROR numeric entry required - This message is displayed when a non-numeric key is pressed, such as
NEXT[], and the cursor is in a field that accepts only numeric entries .
ERROR only bits 0-3 edge trigger- This message is displayed when trying to assign edge triggering to one of
the timing bits that does not have edge-trigger capability.
ERROR operation time out -The current HP-IB disc operation was not completed . It was aborted because of a
lack of response from the disc.
ERROR reload disc first -The cursor must be positioned on the top line of the Storage Operations menu, then
the INSERT key pressed, before the desired operation can be completed .
ERROR requires correction first-This message is displayed when a partial specification has been entered, and
before completing it, another analyzer menu is selected, such as when entering the name of a label in the
FORMAT specification, and then trying to change to the TRACE specification before assigning a bit for that
label .
ERROR requires file description -This message is displayed when an attempt has been made to write a tape file
without creating a file description .
ERROR RESUME not allowed - This message is displayed when the RESUME key has been pressed for an
operation that the analyzer has completed and cannot resume .
ERROR tape operation aborted - This message is displayed when the STOP key has been pressed during a
tape read or write operation, or when a data error has been detected by the analyzer .
ERROR unexpected EOI - The disc drive logic has failed . Indicates possible problems with the disc drive.
ERROR use alphanumeric keys - This message is displayed after pressing the NEXT[ ] or PREV[] keys while
the cursor is in afield which accepts only alphanumeric entries, such as a module name field in the [User Base]
menu of the FORMAT specification .
ERROR use CHS key - This message is displayed when the cursor is on a mathematical sign, and something
other than the CHS (change sign) key is pressed .
ERROR use hex keys-This message is displayed when pressing a non-hex key when the cursor is in a field that
accepts only hexadecimal entries .
ERROR use NEXT[ ] PREV[ ] keys - This message is displayed when pressing a keyboard letteror number key
a field where selections must be made with the NEXT[] or PREV[] keys.
A-3