Waveform Displays; Figure 4-42. Typical State Waveform Display - HP 1630A Operating And Programming Manual

Model 1630A/D/G
State Measurements
Waveform Displays
Figure 4-42 shows a typical state waveform display. It represents the states on eight channels . Waveform
displays may be obtained in any of the state trace modes, except overview . The information on the display is
the same, regardless of the trace mode where it was obtained .
"o"
Marker "x" Marker
Figure 4-42. Typical State Waveform Display
Display Content:
1 to 16 channels (X2 vertical magnification with 8 or less channels) .
Channels on Display:
any bit in any position, identified by label name and bit number (if in multi-bit label)
on left-hand side .
Display control fields Magnification:
selects from 1X to 40X . Bright bar in dotted line at bottom shows position of display
window in memory .
Magnify About:
moves magnified display window to area around "x" or "o" markers.
Cursor Moves :
selects "x", "o", or "x&o" markers to be moved by CURSOR keys . Scale at top shows
number of states between "o" and "x" on display.
Bit Labels :
press NEXT[] key to bring any bit to any point.
press INSERT and DELETE to add or remove channels .
press CLEAR ENTRY to turn off a channel .
press LABEL up-arrow or down-arrow to move a channel up or down on the display.
Roll Indicator :
arrows in upper, right-hand corner indicate whether display window can be
positioned left or right by ROLL keys .