HP 1630A Operating And Programming Manual page 132

Display Messages
Model 1630A/D/G
ERROR disc failure - The disc drive logic has failed . Indicates possible problems with the disc drive .
ERROR disc is not LIF disc -The disc inserted in the addressed unit is not in an appropriate format. Discs used
by the 1630G must be in LIF (Logical Interchange Format) .
ERROR disc is write protected - A write, delete, or format operation was attempted on a write protected disc.
ERROR disc operation aborted - A disc operation was stopped prematurely .
ERROR disc unformatted - The currently inserted disc is unformatted . It must be a LIF (Logical Interchange
Format) disc.
ERROR DON'T CARE not allowed - This message is displayed when the DON'T CARE key is pressed and the
cursor is in a field where "don't care" entries can not be accepted .
ERROR duplicate HP-1119 address - The logic analyzer, printer, and disc must all be assigned unique HP-IB
addresses .
ERROR file not found - The desired file was not found on the addressed disc unit.
ERROR format failed - Attempt to format a bad disc medium .
ERROR illegal file name -A disc file name must start with a letter, followed by an optional sequence of letters
and/or numerals . No spaces, hyphens, or underscores are allowed .
ERROR in controller command - This message is displayed when the analyzer received a command from the
controller (HP-1113 or HP-IL) and did not recognize the command . A second line shows .. . .??? with the first
character of the unrecognized command in inverse video .
ERROR in HP-119 transfer - The HP-1113 interface is not operating properly .
ERROR internal : bad file length - Indicates internal problems with the analyzer . Record events leading up to
this message and contact Hewlett- Packard .
ERROR internal : bad file type - Indicates internal problems with the analyzer . Record events leading up to this
message and contact Hewlett- Packard .
ERROR internal: bad request - Indicates internal problems with the analyzer . Record events leading up to this
message and contact Hewlett- Packard .
ERROR internal: disc error - Indicates internal problems with the analyzer . Record events leading up to this
message and contact Hewlett- Packard .
ERROR internal : undefined error- Indicates internal problems with the analyzer . Record events leading up to
this message and contact Hewlett- Packard .
ERROR invalid in this trace mode -This message is displayed when a display is requested that is not available
in the selected trace mode, such as a trace list when the analyzer is performing an overview measurement .
ERROR inverse assembler too big - An attempt was made to store an inverse assembler in internal storage but
it was larger than the available space.
ERROR LIF directory too big - A disc with too many LIF directory entries is in the addressed drive . Use a
different disc .