Figure 4-18 . 1630G State Listing With Count States List; Figure 4-19. 1630G State Listing With States List In Absolute Values - HP 1630A Operating And Programming Manual

Model 1630A/D/G
State Measurements
State Listing_________----____________________________-______-
Figure 4-18 . 1630G State Listing With Count States List
State Listing------------____________-------_:---______-----
Figure 4-19. 1630G State Listing With States List in Absolute Values
6 . When the analyzer captures a trace from the target system, the analyzer stores 1023 states, however
sixteen states are displayed at one time . The list may be scrolled through by using the ROLL keys .
Another way to quickly locate portions of the list is to move the cursor to the location in the State Listing
marked by the inverse field and put a new value in the field . The list automatically changes to place the
specified location in that position of the list . Typically, when a measurement is taken, only a few states or
a particular event is of interest and it is not necessary to see the entire list . These states or events may be
located by using the [Mark/Show] function of the analyzer.
7 . Move the cursor to the field under ADDR at the right of the [Mark] field in the State Listing . Select an
address in the list and place the value into this field . The asterisks that were beside each listing in the
state list are now only at the locations that contain the address specified in the Mark field under the
ADDR label, as in figure 4-20 . If using relocatable module codes for display, use the NEXT[]or PREY[]
key to select module name and enter the address to be marked with the front panel numerical keys .
8. Move the cursor back to the [Mark] field and change the field to [Show] with the NEXT[] or PREV[] key.
Now only the states that contain the address specified are displayed, as in figure 4-21 . The original trace
is still preserved in memory, but has been temporarily edited .
4- 1 7
Label> RDDR
Base ;
8085 Mnemonic STRT States
+0000* TIME +OBOE JN2 TIME+OOOD
opfch 0
+0001 TIME +000F
36 memory read memrd 1
+0002 TIME . +0010
04 memory read memrd 1
+0003* TIME +000D
OCR D opfch 1
+0004* TIME +000E JN2 TIME+OOOD opfch 1
+0005 TIME +000F 36 memory read memrd 1
+0006 TIME +0010 04 memory read memrd 1
® TIME +000D OCR D opfch 1
+0008* TIME +OBOE JN2 TIME+OOOD opfch 1
+0009 TIME +000F 36 memory read memrd 1
+0010 TIME +0010 04 memory read memrd
1
+0011* TIME +000D OCR D
opfch 1
+0012+ TIME +OOOE JN2 TIME+OOOD
opfch 1
+0013 TIME +000F
36 memory read memrd 1
+0014 TIME
+0010 04 memory read memrd 1
+0015+ TIME +000D OCR D opfch 1
Label> RDDR 8085 Mnemonic STRT States
Base >
+0000+ TIME +B00E JN2 TIME+OOOD
opfch 0
+0001 TIME +000F
36 memory read memrd 1
+0002 TIME +0010
04 memory read memrd 2
+0003* TIME
+000D OCR D opfch 3
+0004* TIME +000E INS TIME+000D opfch 4
+0005 TIME +000F 36 memory read memrd 5
+0006 TIME +0010 04 memory read memrd 6
®* TIME +000D OCR D opfch 7
+0008* TIME +000E INS TIME+0000 opfch 8
+0009 TIME +000F 36 memory read memrd 9
+0010 TIME +0010 04 memory read memrd 10
+0011* TIME +0000 OCR D opfch 11
+0012* TIME +000E JN2 TIME+OOOD opfch 12
+0013 TIME +000F 36 memory read memrd 13
+0014 TIME +0010 04 memory read memrd
14
+0015* TIME +000D OCR D opfch
15