Mitsubishi Electric GOT 1000 Series Manual page 152

POINT POINT POINT
(1) The GOT sends the resource data only one time, regardless of the settings for [Range of data]. The GOT
does not send the sent data to the database.
The GOT may send the sent data when restarting the GOT for downloading the project data and others.
6.12 Precautions
(2) When an action fails due to the communication error between the GOT and the server computer or others, the
GOT sends the failed action data at the next action.
(3) The time to complete the resource data send action (Reference value (seconds))
The following shows the resource data send time for the resource type, and the number of resource data (100,
500, 1000, 10000).
Under the following conditions, the values for sending data differ from the reference values in the following
table.
• Loads on the GOT or loads on between the GOT and the server computer or others
• MES interface function setting
Advanced user alarm
Advanced system alarm
*1
*2
*3
*4
6 - 76 6.8 Job Settings - Actions
Resource type
*1*2
Logging
*3
*3
*4
Operation log
The logging is collected by the buffer historical and the device points set to 250 points and a 100ms cycle for the logging setting.
When collecting data every 100ms cycle is canceled, the value is shown in the parentheses.
When sending the alarm comment with 512 one-byte characters.
When the numbers of insert fields are 7 to 13 by one action.
Number of resource data
100 500
7 31
(5) (23)
2 5
2 5
1 5
1000 10000
59 582
(42) (410)
8 88
8 -
9 82