Checking The Mes Interface Function Status (Status) - Mitsubishi Electric GOT 1000 Series Manual

6.10.1 Checking the MES Interface Function status (Status)

The operation status of the MES interface function can be checked.
The following explains the display of [Status].
The display of [Status] is updated every 3 seconds.
Display
Running
Stopped
Initializing
Starting
Stopping
Getting status
Connection failed
Error
6 - 86 6.10 Diagnosis
The MES interface function is working normally.
The MES interface function is stopped.
Even if trigger conditions are met, no job will be executed during stop of the function.
The GOT is in process of powering from OFF to ON, or resetting.
Even if trigger conditions are met, no job will be executed during initialization.
The MES interface function is starting up after processing of the above Initializing status.
Even if trigger conditions are met, no job will be executed during startup.
The MES interface function is being stopped.
The MES interface function setting screen is attempting to acquire the status from the MES interface
function.
The MES interface function setting screen failed to connect to the MES interface function and could not
acquire the status.
The MES interface setting has not been done, or the MES interface function is stopped due to an error.
Description