Error Code List; Error Log In The Working Log - Mitsubishi Electric GOT 1000 Series Manual

8.2 Error Code List

The error code list is shown below.
For the error output checking method, refer to the following.
8.2.1

Error log in the Working log

Error code
0x41130001
0x41140029
0x4114002A
0x4114002B
0x4114005F
0x41140061
0x41140065
0x41140069
0x41140077
0x41140081
0x41140083
0x41140084
0x41140086
8 - 6 8.2 Error Code List
8.1 Error Handling and Recovery Method
Error description and cause
Tag value collecting error
Setting read error
DB connection service communication error
Type conversion error
Tag write error
Failed to perform the tag access.
Tag value read error
Type conversion to tag component error
DB buffer content error
Partial correction of DB buffer content
DB buffer clear error
Corrective action
• The device value cannot be collected.
Check the device settings and the network
configuration.
• The set data are erroneous.
Download them again.
• In the case of one-shot job execution, the CF card may
corrupted. Replace the CF card.
• Check the Ethernet connection.
• An Ethernet communication error has occurred.
• Check if [Server service settings] are correct.
6.6 Server Service Settings
• Check if the ODBC setting is correct.
7.2 Setting ODBC of Database
• The data cannot be converted to the specified type.
• Change the setting so that type conversion will be
available in any case.
• Failed to write data to the tag.
• Check if data can written to the device specified for the
tag component.
• Check if [Device tag settings] are correct.
6.5 Device Tag Settings
• Failed to read data from the tag.
• Check if [Device tag settings] are correct.
6.5 Device Tag Settings
• The data could not be converted to the type specified
for the tag component.
• Change the setting so that type conversion will be
available in any case.
• Data stored in the DB buffer are invalid.
• The CF card may be corrupted.
• Replace the CF card.
• A part of invalid data in the DB buffer has been
corrected.
• A part of the DB buffered data in the CF card may have
been corrupted.
• Failed to clear the DB buffer.
• The CF card may be corrupted.
• Replace the CF card.
(To the next page)