Sntp Time Synchronization Function - Mitsubishi Electric GOT 1000 Series Manual

5.2 SNTP Time Synchronization Function

The SNTP time synchronization function allows the time on the GOT to be synchronized with the time on the SNTP
server computer on the network.
Time information is utilized for job start conditions or in send data to the database.
For the SNTP time synchronization function setting, refer to the following.
6.9.1 Setting items in SNTP time synchronization setting
POINT POINT POINT
For time synchronization with the SNTP server, pay attention to the following:
• When using the SNTP time synchronization function, do adjust the time in the time setting in Utility or in System
Environment of GT Designer3.
The SNTP time synchronization function does not work if the clock of the GOT is set to be adjusted to the clock
data of external equipment.
• To write the clock time of the SNTP server to controllers, use [Broadcast].
This function can be used in combination with [Broadcast].
SNTP server
SNTP time
synchronization
For [Adjust/Broadcast], refer to the following manual.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
Time broadcast
Time adjustment
5.2 SNTP Time Synchronization Function
1
2
3
4
5
6
7
8
5 - 23