Mes Interface Function Setting - Mitsubishi Electric GOT 1000 Series Manual

8.1.1

MES Interface Function setting

This section explains troubleshooting information on the setting of the MES interface function.
(1) Common to all settings
Symptom
GT Designer3 cannot communicate with GOT.
All the text is not displayed in a table.
(The text display is truncated.)
(2) [Device tag settings] (
Symptom
Unable to change or delete an item in [Device
tag settings].
Unable to set or change [Device tag name].
Checked item
Is the GOT communicating with another GT
Designer3?
Is there any disconnection in the connection
route?
Is there any problem on the personal computer?
Is the port number correct?
(In RS-232 or Ethernet connection)
Is the GOT connected to the network?
(When using Ethernet connection)
Is the IP address setting correct?
(When using Ethernet connection)
Is there a firewall and/or a proxy server in the
connection route?
(In Ethernet connection)
Isn't the column width narrow?
6.5 Device Tag Settings)
Checked item
Is the selected item used in [Job settings]?
Is the selected item used in [DB buffering setting]
of [Option setting]?
Is the selected item used in [Access error
notification setting] of [Server service settings]?
Is the same name used for [Server service
name] or another [Device tag name]?
8.1 Error Handling and Recovery Method
Corrective action
• Check that no other GT Designer3 is running
and communicating on the same personal
computer.
• Check that GT Designer3 is not running and
communicating on other personal computers.
• Connect the cables properly.
• Replace it with another computer.
• Check the port number setting.
• Issue the ping command from the personal
computer to the GOT to confirm the network
connection.
• Correct the IP address setting.
• Ask your network administrator about the
firewall and proxy server settings.
• Adjust the column width of the table.
6.3.1 Screen structure
Corrective action
• As the error dialog box appears, identify the
location, stop using it for another item, and
then delete the item.
• An item used for another item is unable to be
deleted.
• Because a unique name must be used for
[Server service name] and [Device tag name],
use a different name.
1
2
3
4
5
6
7
8
8 - 3