Setting Items Of Db Connection Service Setting Tool - Mitsubishi Electric GOT 1000 Series Manual

7.5 Setting Items of DB Connection Service Setting Tool

The following shows how to change the DB Connection Service settings.
1.
Set the following items and click the
2.
After updating the settings, check for an error by selecting [Administrative Tools] - [Event Viewer] in Windows .
8.1 (2) Error checking procedure
POINT POINT POINT
(1) Change the DB Connection Service settings while a job using the DB Connection Service is not operating.
The status is as follows:
• The GOT is powered OFF.
• The MES interface function operation is stopped by [MES interface setting] - [Diagnosis] tab.
6.10.2 Manipulating the MES Interface Function status (Operation)
(2) If any changed settings are entered with a job using DB Connection Service being operating, the execution of
the connected job is canceled and a communication error occurs.
Also, for a job to which [Enable DB buffering] is selected, SQLtexts are buffered in the DB buffer.
Item
Service port (required)
DB access timeout
Limit IP addresses which permit to
connect
Output access log
Output SQL failed log
(1) Service port (required) (Range: 1024 to 65535, Default: 5112)
Set the number of a port through which the DB Connection Service operates.
The specified port number is used for communications with the GOT.
Set the same value in [Service port] as the one set in [Port No.] in [Server service settings] under [MES interface
setting].
6.6.1 Setting items in Server service settings
button.
Reflect settings
Set the number of a port through which the DB Connection Service operates.
Set a DB access timeout time (Unit: seconds) for writing/reading a database value from the GOT to the
server computer, or for the case where no response is returned after request for program execution.
Specify whether or not to set IP addresses to which connection is to be permitted.
Set whether or not to output the access log.
Set whether or not to output the SQL failure log.
7.5 Setting Items of DB Connection Service Setting Tool
Description
1
2
3
4
5
6
7
8
7 - 13