Siemens SINUMERIK 840DE Operation & Programming Manual page 182

11
Alarms and Messages
11.2 Alarms with ManualTurn
111 902
Explanation
Reaction
Remedy
111 904
Explanation
Reaction
Remedy
112 999
Explanation
Reaction
Remedy
11-182
Start with valid reference point only
The axes have no valid reference point.
Alarm display
Reference all axes
4th axis not configured, that is, no powered tool possible
MD9643 CTM_ENABLE_DRIVEN_TOOL was activated, without a 4th
axis being known to the system.
Alarm display
Create a 4th axis. To do this, change the following machine data:
• Channel-specific
20070 $MC_AXCONF_MACHAX_USED [3]=4
• Axis-specific for the 4th axis
30300 $MA_IS_ROT_AX=1
30310 $MA_ROT_IS_MODULO=1
30320 $MA_DISPLAY_IS_ MODULO=1
30350 $MA_SIMU_AX_VDI_OUTPUT=1
35000 $MA_SPIND_ASSIGN_TO_MACHAX=2
Faulty graphics data
Exit graphic and start again
More data have been generated than the operator interface can read.
Alarm display
Stop graphic
Deselect graphic and select again.
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
11
08.02
n