Siemens SINUMERIK 840DE Operation & Programming Manual page 186
Hide thumbs
Also See for SINUMERIK 840DE:
- Programming manual (516 pages) ,
- User manual (100 pages) ,
- Function manual (2184 pages)
Table of Contents
Advertisement
12
Examples
12.1 Example 1: External machining with groove and thread
Result
4. Stock removal (roughing)
Result
5. Stock removal (finishing)
12-186
•
Press soft key
Stock
•
and enter stock removal parameters for roughing:
removal
T1
F: 0.2 mm/rev FR: 0.1 mm/rev S: 150 m/min
Longitudinal
ß
External
Infeed depth
Finishing allowance
Blank description:
Allowance
Machine relief cuts:
Machine tool angle:
Insert angle
Main cutting edge angle
•
Press the
Stock
•
and enter stock removal parameters for finishing:
removal
T2
F: 0.14 mm/rev
Longitudinal
ß
External
Machine relief cuts:
Machine tool angle:
D: 3 inc
Ux: 0.4 inc
Cylinder
X
: 0 inc
D
No
Yes
α α α α : 80°
β β β β : 93°
soft key
S: 220 m/min
No
Yes
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
12
08.02
Uz: 0.1 inc
Z
: 2 inc
D
Advertisement
Table of Contents
