Pocket Calculator - Siemens SINUMERIK 840DE Operation & Programming Manual

2
Operation
2.5 Operating system

2.5.4 Pocket calculator

2-34
Extended soft key menu
You can display the extended soft key menu incorporating the
following soft keys in all modes by pressing the "ETC" key:
For defining the control zero in the machine coordinate
Preset
system; inch/metric changeover
Menu with inputs for tool offsets/wear and select/
Tool
deselect tool
Menu for additional spindle inputs
Spindle
Menu with display of functions:
Offset
Zero point and manual offsets
Run diagram to trace a program as it runs
Simult.
recording
Selection and deselection of Teach-in function
Teach
In
Function
The calculator function is activated by pressing the edit key. Any
number of calculations can then be performed using the four basic
arithmetic operations (+, –, *, /) and the equal sign (=). The value you
enter is calculated with the previously entered value.
You can terminate the calculation with the input key which also a
closes the input field.
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
2
08.02