Siemens SINUMERIK 840DE Operation & Programming Manual page 46

3
Preparatory Functions for Machining
3.3 Incremental feed mode
3-46
Alternative
Enter incremental dimension, e.g. 0.175.
If necessary, use the cursor keys to select the infeed speed and
overwrite the value.
Activate incremental feed by pressing NC Start key.
If required, repeat the process with the same or different values.
To deselect incremental feed mode, select the key labeled "Increment"
again.
You can interrupt axis feed at any time by pressing the Stop key or
abort the process by deselecting the axis direction.
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
3
08.02