Toshiba e-STUDIO163 Service Manual page 123

(3) Remove 1 screw and take off the toner
motor.
[C] Main motor drive unit
(1) Take off the Process unit.
P.11-9 "[A] Process unit"
(2) Take off the toner motor with the bracket.
(3) Remove 2 screws and take off the registra-
tion roller holder.
Note:
When installing the registration roller holder,
align the arm of the registration roller clutch
with the stopper of the registration roller
holder.
(4) Remove 1 clip and take off the bushing.
December 2005 © TOSHIBA TEC
Tonner motor
Fig. 9-5
Registration roller holder
Fig. 9-6
Clip Bushing
Fig. 9-7
9 - 7
Bracket
e-STUDIO163/203 DRIVE UNIT
9