[D] CIS home position sensor (S1)
(1)
Take off the original glass.
P.6-8 "[A] Original glass"
(2)
Remove 1 screw and take off the CIS home
position sensor with the bracket.
(3)
Disconnect 1 connector.
(4)
Release 3 latches and take off the CIS home
position sensor.
[E] CIS unit (CIS)
(1)
Take off the original glass.
P.6-8 "[A] Original glass"
(2)
Move the CIS unit to the right most position.
December 2005 © TOSHIBA TEC
Bracket
CIS home position sensor
Fig. 6-15
CIS home position sensor
Fig. 6-16
Fig. 6-17
6 - 11
CIS unit
e-STUDIO163/203 SCANNER
6